Filter
Top Products
TIME SEARCH
The Time Search function makes it possible to quickly advance the tape to your desired position simply by
entering the exact amount of playback time you want to skip.
Example: To watch a program after 2 hours and 50 minutes from the present position, in either direction.
1 Select "TIME SEARCH"
Press the TIME SEARCH button on the remote control..
2 Enter your desired time
Press the PLAY/
or STOP/ button until your desired time appears. ( "2:50" stands for 2 hours 50
minutes)
• The Time Search mode will be cancelled if the procedures are not activated in 30 seconds.
TIME SEARCH
2:50
3 Begin Time Search
By pressing the REW or F.FWD button, the VCR will rewind or fast forward to the specified point.
The time counts down as the searching progresses.
4 After Time Search
Playback starts automatically when 0:00 is reached.
• A video cassette must be inserted in the VCR for this function to work.
• Time Search can be set up to a maximum of 9 hours 59 minutes (9:59).
• This function will not operate in the recording mode.
• When you want to cancel the Time Search while in progress, press the STOP button.