Filter
Top Products
Getting Started (Initial Setup) - 26 -
3. Press 4 to select D.S.T. option.
Each time 4 is pressed, the option for "4 SET D.S.T" switches from <AUTO> to <ON>,
<OFF> and back to <AUTO>.
<AUTO>: The daylight savings time (D.S.T) is set automatically.
<ON>: The time advanced from the Standard Time by one hour is displayed from
the first Sunday of April through the last Sunday of October.
<OFF>: The Standard Time is displayed throughout the year.
This screen gives an example where <ON> is specified.
4. Press 2 and set the time again.
If the displayed time drifts from the current time by more than one hour even after
steps 1 - 4 have been performed, change the D.S.T option again in step 3, then set the
time again.
To set the clock manually
1. Press GUIDE, then press 3 to bring up the CLOCK SET screen.
Press 1 to switch "CLOCK SET <AUTO>" of item 1 to "CLOCK SET <MANUAL>".
If "CLOCK SET <MANUAL>" is specified in item 1, "SET TIME ZONE" of item 3 and
"SET D.S.T" of item 4 are not displayed.
2. Press 2 to bring up the following screen.
Press the number buttons on the remote control to set the current time - two digits for
the hour and two for the minutes. Then press 1 or 2 for AM or PM, respectively.
For example, if it is now 2:15 PM, press 0, 2, 1, and 5 for hours and minutes, and press
2 for PM.
Continue pressing buttons to set the date. For example, if today is July 8, 1996, press 0,