Hitachi VT-UX605A VCR User Manual


 
Care and Servicing (Problems) - 74 -
Poor picture TV channel selector on the Set TV to channel 3
quality ("noise") proper channel? or 4 as correct for
during playback. your area. (Set TV to AUX or VIDEO if
you have a direct video hookup.)
Is TV correctly tuned? Fine tune the TV.
Static lines through the pic- Press 1 or 4 button to adjust tracking.
ture?
"Noisy" picture despite all Have video heads cleaned by a qualified
previous adjustments, even service technician.
when playing different cas-
settes?
No picture TV set to the correct video Set TV to channel 3 or 4
during viewing .channel?
TV cannot be Is VCR remote control pro- Follow instructions in
operated by grammed for your TV? Advanced Operations
the VCR's to program the remote
remote control to send signals that your TV can rec-
ognize. (Not all TV brands are
compatible.)
Is remote control set to Press the TV device
control the TV? button, then press the button
corresponding to the TV function you
want.
Cannot store Was 1 TAPE NAVIGATION Switch it to <ON>
tape data in <OFF> specified in the TAPE
memory NAVIGATION MENU?
Is the recording time too short? Data is not stored in memory when the
recording time is less
than 5 minutes (less than
15 minutes in EP mode).
Is tape data memory full? Delete unnecessary tape data
LIMITED WARRANTY
Hitachi Home Electronics (America), Inc. and Hitachi Sales Corporation of Hawaii
("Hitachi",) warrants this component in duration as stated below:
* VIDEO CASSETTE RECORDER
* CAMCORDER
* AC ADAPTER CHARGER
* 90 DAYS LABOR (Carry-in)
* 1 YEAR PARTS (Except Battery)
Conditions of Hitachi Limited Warranty