Filter
Top Products
Basic Operations (VCR Plus + Recording) - 48 -
5. Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY
RECORDING.
Important: Programming does not take effect unless you select one of these options.
6. When the next screen comes up, choose between standard or extended tape speed
by pressing the 5 button. This is also a good time to check the channel number - it
should be the one on which you usually watch the program at home. (If not, you need to
check your VCR Plus+ channel setup.)
7. Review the screen to be sure everything is set as you want, then press VCR PLUS+
to complete your programming or continue with additional programs.
When you have set up all the timed recordings you want:
Don't forget to load a videocassette (with the safety tab still attached) to record on.
If using a cable box the VCR can control, turn on the cable box before the time the
recording is to begin.
If using a cable box the VCR cannot control, turn on the cable box and tune it to the
channel you want to record before the time the recording is to begin.
Important: Your timed recording settings take effect when you turn off the power on the
VCR.
Caution on VCR Plus+ Recording
After entering a VCR Plus+ number, check the information displayed with the "PROGRAM
REVIEW", if there is (are) any unnecessary program(s), please cancel. (page 43)