Hitachi VT-UX605A VCR User Manual


 
Care and Servicing (Problems) - 73 -
For more information about how to obtain these accessories, please call TOLL FREE 1-
800-448-2244 for your nearest Hitachi Authorized Parts Distributor in the continental
United States. For ALASKA and HAWAII, please contact the nearest Hitachi Regional
office.
Design and specifications subject to change without notice.
Often Encountered Problems
Problem Things to Check Solution
No Power. Power cord plugged in? Connect the power
cord to AC outlet.
Delayed Program set to the correct Reset the delayed recording.
recording does channel?
not work. Program time and date set Reset the delayed recording.
correctly?
VCR power turned off? Turn power off to activate the
timer.
Safety tab removed from Put cellophane tape over the
the videocassette? tab area, or use a videocas-
sette with the safety tab
intact.
Clock set to "--:--"? Set the time, then program
delayed recording.
Delayed Has power failure of more When the auto clock set
recording does than one hour occurred? function is operating, the
not work even time may be reset even after
when the clock a power failure of more than
is set correctly. one hour. However, pro-
grammed delayed record-
ings will have been cleared
and must be reset.
Does not record Safety tab removed from Put cellophane tape over the
when you press the videocassette? tab area, or use a videocas-
REC. sette with the safety tab
intact.
TV program Loose or inappropriate Review hookup directions
cannot be connections between VCR and make correct, firm con-
viewed or and TV? nections.
recorded.
VCR's display lights Was "1 CLOCK SET The auto clock set function is
for several seconds <AUTO>" specified from operating. This does not
after the power is the CLOCK SET screen? indicate a fault.
turned off.
Problem Things to Check Solution