Filter
Top Products
SETTING THE CLOCK -AUTOMATIC MODE WITH CABLE BOX - 27 -
• If SET MODE "MANUAL" is highlighted, press the (1) button to switch it to SET MODE "AUTO".
5 Press the (2) button.
This screen appears to show that the clock is being set.
PLEASE WAIT
CLOCK IS SETTING
CANCEL GUIDE
• It may take about five minutes.
• Since the VCR is searching for a broadcast station that transmits a time signal, the channel indication on the
cable box changes automatically.
When the clock is set, the screen changes to a TV picture and the correct time appears in the VCR's display.
Notes:
• If the clock is not set after five minutes have elapsed, set the clock manually (see page 20).
• If the displayed time drifts from the current time by more than one hour, select your correct time zone and set the
DST (see page 19).