Filter
Top Products
CABLE BOX SETUP - 37 -
CABLE BOX SETUP
Note: This setup should be performed if you receive all channels through a cable box.
(Hookups [E], [F] or [G]).
The VCR can be programmed to:
• Automatically select channels on the cable box during a timer record or VCR Plus+ delayed recording operation.
• Change channels on remote controlled cable boxes with the VCR remote control.
BEFORE YOU BEGIN...
Make sure the cable box is positioned properly on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
MENU
1 2 3
REVIEW SETUP CLOCK
4
CHANNEL
—————————————————
7 ENGLISH 8 FRANÇAIS
END GUIDE
3 Press the (4) button twice to select the CHANNEL PRESET operation.
CHANNEL PRESET
1 CATV1 2 AUTO
CH SOURCE CHANNEL SET
3 CH LIST 4 VCR PLUS+
ADD/ERASE SETUP
5 CABLE BOX
SETUP END GUIDE
4 Press the (1) button twice to select "CATV2".
CHANNEL PRESET