Filter
Top Products
PROGRAMMING THE VCR REMOTE TO CONTROL YOUR CABLE BOX - 71 -
PROGRAMMING THE VCR REMOTE TO CONTROL YOUR CABLE BOX
The VCR remote control can be programmed to control many cable boxes that are remote controlled. You can
easily change channels.
1 Turn on cable box.
2. Point VCR remote control toward cable box.
3. Press and hold the CATV button.
4. Press the number button corresponding to your cable box as shown in the set up chart. The cable box channel
will change to confirm that the remote control has been set.
Cable box Press CATV and this
number button
Cable box Press CATV and this
number button
Jerrold 1 1 Zenith 5
Jerrold 2 2 Scientific
A
tlanta
6
Jerrold 3 3 Pioneer 7
Hamlin 4 Philips 8
Note: if your cable box is not listed on the setup chart, try all the buttons listed in the chart until the cable box
changes channels. If the cable box channel does not change, you won't be able to program the remote for your
cable box.
Using the VCR remote to control your cable box
1 Press the CATV button on remote control.
2 Point VCR remote control toward cable box.
3 Press the button corresponding to the functions available on your cable box remote control.