Honeywell HD-DVR-1008 DVR User Manual


 
Overview of Navigation and Controls
54
PTZ Setup
Note
The camera video should be in the current screen.
Before setup, check whether the following connections
are right:
PTZ and decoder connection
Decoder address setup
Decoder A (RS485 +) / B (RS485 -) line connects with
DVR A/B line
Boot up the DVR, and input the user name and password.
In the main menu, select SettingPan/Tilt/Zoom. The interface is shown
as in
Figure 4-29. Here you can set the following items:
Channel: Select the channel connected with the speed dome video
port.
Protocol: Select the corresponding PTZ protocol (such as PELCOD).
Address: Identical to the device address set in the speed dome.
Default address is 1.
Baud rate: Select corresponding baud rate. 2400 for Pelco-D
protocol.
Data bits: Select corresponding data bits. Default value is 8.
Stop bits: Select corresponding stop bits. Default value is 1.
Parity: There are three options: Odd/Even/None. The default value
is none.