Filter
Top Products
3-3. Service Searching
The Antenna Setting menu sets the characteristics of each antenna.
32 antennae can be supported, one of which for SMATV.
The Antenna Setting menu supplies the following items to
characterise the antenna.
Assigns an index to each antenna. Hence, the value is unique for
each antenna. It can assign up to 32 indexes.
Assigns a satellite name to each antenna. The available satellite
names supplied by default can be used. Moreover, the satellite
name can be defined by the user with the “User Defined” item.
Assigns LNB frequency of LNB in each antenna. It can be set
as “Universal”, “5150”, “9750”, “10600”, “10750” and “11475”.
It can also be set as any value using the numeric buttons.
Disables/enables the 22KHz tone in the signal line.
It sets the DiSEqC input to select a proper antenna.
It can be set as “Tone Burst A”, “Tone Burst B”, “DiSEqC A”,
“DiSEqC B”, “DiSEqC C” and “DiSEqC D”.
Disables/enables the motorise function.
Switches/off the LNB power.
Sets the LNB voltage level. The LNB voltage may drop too low to
supply power to the LNB due to the long length of the signal cable.
To compensate the voltage drop, the item should be set on “High”.
Antenna Setting
Antenna Alternative
22KHz Tone
DiSEqC Input
LNB Power
LNB Voltage
LNB Frequency
Satellite Name
Motorised System
GB41