Humax IR-TWIN Satellite TV System User Manual


 
!+
**
You can connect the product to the TV with the particular equipments for gaining optimum signal
quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select
the most appropriate procedure depending on the equipment you have.
**
1. Connect the antenna to the LNB IN.
2. Connect the product and the TV using an RCA cable.
3. Connect the product and the TV using an RF cable.
4. Connect the power cord of the product to a wall outlet.
5. Power on by pressing the STANDBY button of the remote control or the STANDBY button at
the front of the product.
**
**
Note:
Connect your aerial or cable to the RF IN to watch analogue channels.
Tune the TV to an UHF channel if the product is connected to the TV using an RF cable.
 !+
 