Filter
Top Products
**
This chapter describes how to set up the receiver. Select the most appropriate procedure depending
on your requirements.
Note: If you encounter any problem when setting up the receiver, please contact your local product
distributor.
2.1 Connecting the Aerial
1. Connecting TV and VCR
Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver.
SCART and co-axial cable are connected as in the figure above.
**
**
2. Setup
GB 12
**
**
**
**
**
**
**
**
**
**
**
**
**
**