Filter
Top Products
**
1. If new software is found when powering on
1. A message will be displayed to notify that new software is found.
2. Select Yes and press the OK
button to update the software.
3. Starts downloading new software. Please wait until the updated is completed.
4. When completing the software update, the equipment is automatically powered off and on
again.
2. If updating software from Menu
1. Press the MENU button.
2. Select Installation using the
button, and press the
OK
or button.
3. Enter Password using the NUMERICAL (0-9) button.
4. Select Software Update using the
button, and press
the OK
or button.
**
3. Automatic Update
You can set the product to find HUMAX software update site and update software automatically.
1. Select Automatic Update using the
button, and
press the OK
or button. Automatically search for
new software.
2. When detecting update software, the following result is
displayed. If new software is not found by Automatic, use
Manual Update.
3. Select Yes and press the OK
button to start updating.
Select No and press the OK
button to return to the
previous menu without updating. Select Later and press
the OK
button to update later. That means the update
menu display as soon as you turn on the receiver next
time.
4. When completing the software update, the product is
automatically powered off and on again.
**
11. Software Update
GB 56
**
**
**
**
**
**
**
**
**
**
**
**
**
**