Filter
Top Products
20
1. Press AF/TA button shortly to turn ON or turn OFF the AF function.
AF indicator on display will flash until RDS information is received.
2. If RDS service is not available in your area, turn off the AF mode.
Default setting is ON.
TA (Traffic Alarm) function
Press the AF/TA button and hold for 2 seconds to turn ON or turn OFF the TA function.
In TA mode traffic program will be automatically searched, until the program is received.
When traffic announcement is received, the TA indicator will display. The unit will temporarily switch to the
tuner mode (regardless of the current mode) and begin broadcasting the announcement at TA volume level. After
the traffic announcement is over, it will return to the previous mode and volume level. When TA is turned on,
SEEK, SCAN, AMS function can only be received or saved when traffic program identification (TP) code is
received.
PTY (Program Type)
1. Press PTY button to activate the PTY function. The previous PTY type is shown.
2. Press PTY once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons
1 - 6 to select the desired program type (see the following table).