Filter
Top Products
ENGLISH
37
Function Setup
Press / buttons to move to “SOURCE”.
Press
/ button, then source changes.
➟ see the refer supported PIP table.
➥ How To Directly Change Sub Source : Press SOURCE button.
In case of PIP mode, go to step 8
if you need to set the “SWAP” of Main and sub pictures.
Press
/ buttons to move to “SWAP”, then Press buttons.
➥ How To Directly Set the SWAP : Press SWAP button.
In case of PIP mode, go to step 9
if you need to set the “SIZE” of Sub picture.
Press / buttons to move to “Size”
Press
/ button, then mode will changes in order below.
➛ SMALL ➛ MEDIUM ➛ LARGE ➛
➥ How To Directly Adjust PIP SIZE : Press SIZE button.
In case of PIP mode, go to step 11
if you need to set the “POSITION” of Sub picture.
Press
/ buttons to move to “Positon”.
Press
/ button, then the mode will changes the following order.
➛ LEFT TOP ➛ RIGHT TOP ➛ RIGHT BOTTOM ➛ LEFT BOTTOM ➛
➥ How To Directly Set the POSITION : Press POSITION button.
In case the Input source in Sub picture is TV,
go to step 13 when you wish to change the channels of Sub picture.
Press
/ buttons to move to “CHANNEL”, then press / buttons to
select channel number.
Press EXIT button to TV viewing or press MENU button to return to the previous
menu.
6
8
9
7
10
11
12
13
14
Adjust the size in PIP
PC
DVI/HDMI
COMP-1
COMP-2
S-Video
Video
FSCRT
HSCRT
Analog TV
Memory
PC
X
X
X
X
O
O
O
O
O
X
DVI/HDMI
X
X
X
X
O
O
O
O
O
X
COMP-1
X
X
X
X
O
O
O
O
O
X
COMP-2
X
X
X
X
O
O
O
O
O
X
S-Video
O
O
O
O
X
O
O
O
O
X
Video
O
O
O
O
O
X
O
O
O
X
FSCRT
O
O
O
O
O
O
X
O
O
X
HSCRT
O
O
O
O
O
O
O
X
O
X
Analog TV
O
O
O
O
O
O
O
O
X
X
Main
Sub
Supported PIP Table
PIP : O → Supported, X → Not Supported