Filter
Top Products
-9-
BASIC CONNECTION
uEnsure that the power switch of this unit and other
equipment to be connected is turned off before commenc-
ing connection
uRead through the instructions before connecting other
equipment
uEnsure that you observe the color-coding when con-
necting audio and video cords
A: Connecting to TV set
1. TV set (not included)
2. DVR Record player
3. To S-video input connector of TV set (not included)
4. 75ohm Antenna input jack (antenna cable not included)
5. Video/Audio cord
6. To composite video input connector of TV set (yellow)
7. To TV Set audio input left and right connector.(white,
red)
To get the best possible image quality, please use the S-
video cord. Connect the unit to the TV set with S-video
input, and set the TV set to S-video input. Meanwhile set
the OSD menu’s video output to S-video. Then the image
will be clearer.
Recommendation: Set the analogue audio output as
2 CHANNEL
B: Connection with External Antenna/CATV signal
Source and TV set
1. Audio/Video equipment (not included)
2. TV SET (not included)
3. DVR Record player
4. 75ohm Antenna input jack (Antenna cable not supplied)
5. Video/Audio cord.
6. To TV set video input connector(yellow).
7. To TV set audio input connector (white,red).
8. S-video. to TV set S-video input connector .
9. Video/Audio cord .
10. to Audio/Videot equipment video output connector.
11. to Audio/Videot equipment audio output connector
(white,red)
Recommendation: Set the analogue audio output up
2 CHANNEL
DVR-˵Ã÷Êé.p65 03-9-16, 15:189