Filter
Top Products
30 IBM Netfinity EXP300 - Type 3531 Hardware Maintenance Manual
• Review the Safety Information that comes with your EXP300
• Refer to “Locations” on page 8 for removing the switch card, environmental
services monitor (ESM) boards, fan and power supply assemblies, and hard
drives to reduce the weight of your EXP300
Note: The illustrations in this documentation might be slightly different from your
hardware.
1. Loosely insert two M5 screws 2 in the rear of the enclosure; then, turn the
EXP300 counter-clockwise onto its left side and slide it fully into the enclosure.
2. Secure the front of the EXP300 with black M6 hex screws 1 on the top and
bottom; then, tighten the rear M5 screws 2 to secure the back of the EXP300.
Statement 4
≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs)
CAUTION:
Use safe practices when lifting.