Filter
Top Products
SCOM-100, User guide 55
If a connection is established the answer is ‘OK’. If you
don’t see your typed characters, give the following
command to enable character echoing:
Ate1
All configuration commands can be passed to the unit
from the Windows HyperTerminal. The command
structure is the same to that of the SMS commands,
except the fact that they are embedded in an overall
‘atsms’ command.
Example:
The SMS command:
1100,0,1,Door contact,3,30
for digital input configuration can be given via the terminal
as:
atsms=”1100,0,1,Door contact,3,30”
All device responses are routed to the terminal’s screen.
7.2.2 Using the SCOM Configurator for configuration
The SCOM Configurator is a Windows application for
convenient configuring and commissioning the SCOM-
100 unit. See the SCOM Configurator’s manual for more
information.