Filter
Top Products
11
Insignia NS-19LCD 19” LCD TV
www.insignia-products.com
3 Press the ENTER, VOL+, or VOL– button to
open the Channel menu.
4 Press the CH+ or CH– button to select Input.
5 Press the ENTER, VOL+, or VOL– button to
select Antenna or Cable.
Setting up the channel list
To set up the channel list:
1 Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button one or more
times to select Channel.
3 Press the ENTER, VOL+, or VOL– button to
open the Channel menu. The Auto
Searching option is highlighted.
4 Press the ENTER, VOL+, or VOL– button to
start searching for channels. If you want to
stop the search, press the MENU button.
Adding and erasing channels
To add and erase channels:
1 Press the number buttons for the channel
you want to add or erase.
2 Press the MENU button to open the
on-screen display (OSD).
3 Press the CH+ or CH– button one or more
times to select Channel.
4 Press the ENTER, VOL+, or VOL– button to
open the Channel menu.
5 Press the CH+ or CH– one or more times to
select Channel Skip.
6 Press the ENTER, VOL+, or VOL– button to
select On or Off.
If you select On, the channel is erased from
the list.
If you select Off, the channel is added to the
list.
When you erase a channel, you cannot tune
to the channel with the CH+ or CH– buttons.
You can tune to the channel by pressing the
numbers buttons for the channel.
Fine tuning the TV signal
Automatically fine-tuning
To automatically fine-tune the TV signal:
1 Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button to select
Channel.
3 Press the ENTER, VOL+, or VOL– button to
open the Channel menu.
4 Press the CH+ or CH– button one or more
times to select AFC.
5 Press the ENTER, VOL+, or VOL– button to
turn the AFC option on or off. When the AFC
option is turned on, your TV automatically
fine-tunes for the best picture and sound.
Manually fine-tuning
To manually fine-tune the TV signal:
1 Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button to select
Channel.