Filter
Top Products
7
Insignia NS-19LCD 19” LCD TV
www.insignia-products.com
Setting up your TV
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
3 Replace the cover.
Connecting your TV to an electrical outlet
To connect your TV to an electrical outlet:
• Plug the power cord into an electrical
outlet.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
If your antenna cable has a 75 ohm connector,
connect the cable to the RF jack on the back of
your TV.
Notes
• Check all cables and connectors before making any
connections.
• Loose connectors can cause image and color problems, so
make sure that all connectors are connected securely.
• Always turn off your TV and any connected devices before
you connect or disconnect a device.
• The illustrations in the following tasks may vary from your
model.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the batteries leak,
clean the battery compartment with a cloth. If chemicals
touch your skin, wash immediately.
• The batteries that came with your TV may have a shorter
life than new batteries.
• If the remote control is not going to be used for an extended
period of time, remove the batteries.
Notes
• Make sure that you use the correct type of power. See the
label on your TV.
• If you do not intend to use your TV for an extended period
of time, unplug the power cord from the electrical outlet.
75 ohm cable
300-ohm cable