Filter
Top Products
28
Insignia NS-42LCD 42-inch LCD TV
www.insignia-products.com
Customizing the sound
1 Press MENU to display the main menu.
2 Press or to display the AUDIO menu
page, then press to enter the menu.
3 Press or to select a setting, then press
or to adjust the setting.
4 Press EXIT to return to TV viewing.
Selecting the sound mode
You can quickly select the sound quality from
three preset modes and one user-set mode.
To select a sound mode:
• Press the AUDIO button repeatedly to select
the sound quality you want. You can select:
• NEWS: Select for a speech or
conversation program.
• MOVIE: Select for a movie program.
• MUSIC: Select for a music program.
• USER: The sound quality you set.
Setting up Stereo/SAP broadcasts
This TV can receive MTS stereo programs and
any SAP (Secondary Audio Program) that may
accompany the stereo program. This type of
signal is available only from analog channels.
You can select Stereo or SAP only when the TV
station transmits these signals. Mono sound is
automatically received if the broadcast is only in
monophonic. You can also select Mono if you
are having difficulty receiving a stereo signal.
To select the MTS/SAP audio mode:
1 When viewing an analog channel, press the
MTS/SAP button. The AUDIO MODE menu
opens.
2 Press or to select MTS mode you want
(Mono, Stereo or SAP), then press OK to
confirm.
Option Function Controls
Headphone
volume
Adjusts headphone volume. stronger
weaker
Treble Adjusts treble (high sounds).
stronger
weaker
Bass Adjusts bass (low sounds)
stronger
weaker
Balance Adjusts volume balance (left
and right volumes).
Higher
volume from
right speaker.
Higher
volume from
left speaker.
Focus
window out
(PIP or PBP
mode only)
In twin window mode (PIP or
PBP), if Speaker is selected
(default), the focus window’s
sound is output from speakers
while the other window’s
sound is output from the
headphones jack.
If Headphone is selected, then
the focus window’s sound is
output from the headphones
jack, while the other window’s
sound is output from
speakers.
If Both is selected, then the
focus window’s sound is
output from speakers and the
headphone jack. (The other
window’s sound is
automatically set to None).
Speaker/
Headphone/
Both
AVC (auto
volume
control)
Each broadcasting station has
its own signal conditions,
which can make it necessary
to adjust the volume every
time the channel is changed.
Turning AVC On lets you
automatically adjust the
volume of the channel you
want by lowering the sound
output when the modulation
signal is high or by raising the
sound output when the
modulation signal is low.
ON/OFF
Note
• The menu items differ, depending on the
current TV mode.
• The Focus Window Out menu is available only
in a twin-window mode (PIP or PBP) and either
window program is not in Rating Blocked mode.
If Both is selected and, later, either window
program enters a Rating Blocked mode, the
sound mutes. To cancel mute, exit the Rating
Blocked state for the program, then change this
setting to a different value.
• The main picture is the default focus window.
You can select the sub-picture as the focus
window by pressing OK. A green border
appears around the focus window.
Note
In a multi-window mode, Stereo or SAP can be
selected only for the main picture.