Filter
Top Products
5
www.insignia-products.com
Connections to other equipment
The exact arrangement you use to connect
various video and audio components to your TV
is dependent on the model and features of each
component. Check the owner's manual provided
with each component for the location of video
and audio inputs and outputs.
The connection diagrams are offered as
suggestions. You may need to modify them to
accommodate your particular selection of
components. The diagrams are intended to
show component video and audio connections
only.
Connecting your TV to a VCR
Connecting your TV to a VCR with an S-Video
cable
Use this method to connect your TV to video
devices with an S-Video output jack. This type of
connection provides better picture quality than
the audio/video cable connection.
Use a commercially available S-Video cable for
this connection.
If you connect a VCR with an S-Video cable to
the S-VIDEO IN jack on the back of your TV, you
must also connect the audio cords to the AUDIO
IN jacks on the back of your TV. The S-Video
cable only carries the video signal. The audio
signal is separate.
Connecting your TV to a DVD player or
satellite receiver with an S-Video cable
Connecting your TV to a DVD player with
component video
Connecting your TV to a DTV receiver/set-top
box
If you connect a DTV receiver/set-top box,
connect your TV to it by using a component
video cord.
Connecting an external audio system
This connection lets you use an audio amplifier
and external speakers, and adjust the audio
level using your TV’s remote control.
Note
If you connect to the S-VIDEO and VIDEO jacks at
the same time, the S-Video connection has
priority.
To Audio/Video OUT
jacks
To AUDIO/VIDEO 1 (or 2) IN
jacks
TV back
Audio/video cable (not
supplied)
S-Video cable (not
supplied)
Audio cable (not
supplied)
To S-Video OUT
jack
To Audio OUT
jacks
To S-VIDEO IN
jack
To AUDIO IN 1 (or 2)
jacks
TV back
Note
The Component video inputs of your TV are for
use with devices which output 480i/1080i
interlaced signals and 480p/720p progressive
signals.
S-Video cable (not
supplied)
Audio cable (not
supplied)
To S-Video OUT
jack
To Audio
OUT jacks
To S-VIDEO IN 1
(or 2)
To AUDIO IN 1 (or 2)
jacks
TV back
YP
B
P
R
Video cable (not
supplied)
Audio cable (not
supplied)
To Component OUT
jacks
To Audio
OUT
jacks
To Component IN jacks
To AUDIO IN jacks
TV back
YP
B
P
R
Video cable (not
supplied)
Audio cable (not
supplied)
To Component OUT
jacks
To Audio
OUT
jacks
To Component IN
jacks
To AUDIO IN jacks
TV back
NS-30HTV.fm Page 5 Wednesday, August 2, 2006 4:36 PM