Filter
Top Products
8
Insignia NS-CL19C 19" Combo DVD/LCD TV
www.insignia-products.com
Setting up your TV
Installing the remote control batteries
To install the batteries:
1 Open the battery compartment on the back of
the remote control.
2 Insert the two AA batteries (provided) into the
battery compartment. Make sure that the (+)
and (-) symbols on the batteries match the
diagram inside the compartment.
Using the remote control
To use the remote control:
• Point it directly at the TV, within a 30° angle of
the IR sensor on the front of the TV, and
within 20 feet.
Connecting to video sources
Connecting to an antenna or cable/satellite
receiver
To connect an external antenna or cable/
satellite receiver:
1 Connect the antenna cable (1) from an
antenna (2) or cable/satellite receiver (3) to
the antenna input jack (4) on the TV.
2 Press the INPUT button to set the TV’s signal
input to TV.
Note
Objects between the remote control and the
sensor may weaken the remote control’s IR signal.
Range can be diminished by direct sunlight
shining on the TV’s IR sensor.
Cautions
Do not expose the remote control to liquids, direct
sunlight, or shock.
The remote control may not work correctly if the
TV’s IR sensor is under direct sunlight or strong
lighting. In these cases, change the angle of the
lighting or the TV screen, or operate the remote
control closer to the IR sensor.
Notes
• To improve picture quality in a poor signal area,
you can purchase and install a signal amplifier.
• To split the signal from an antenna, you will
need a 2-way signal splitter.
1
2
3
4