Filter
Top Products
10
Insignia NS-LCD52HD-09 52” LCD HD TV
www.insignia-products.com
For information on operating the external
signal source, refer to the user guide for that
device.
When using an HDMI-DVI adapter to pass the
DVI signal to HDMI input, use the L/R connector
to the right side of HDMI1 as audio input.
Connecting a computer
To connect a computer using VGA:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
2 Plug an audio cable from your computer’s
audio out jack into the AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
4 Press the INPUT button repeatedly to select
the VGA input source.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1 Make sure that the power cord is connected
to your TV and a power outlet.
2 Press the button to turn on your TV. The
power indicator LED turns blue.
3 Press the button again to return your TV
to standby. The power indicator LED turns
red.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
TV
SPDIF
3
HDMI jack
S-Video and
composite
video input
Headphone jack
Audio input
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
Many newer computers have HDMI output.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press the POWER button
on your TV or remote control.
VGA cable