Filter
Top Products
43
DPS-9.1 US_E 29343004
Turning Off the Video
Signal Output
Switching the video signal off
Press VIDEO CIRCUIT OFF on the
DVD Player or V.OFF on the remote
controller repeatedly.
The VIDEO OFF indicator appears on the display.
To turn on the video circuitry, press the button
again.
The DVD-Player can be set playing audio
exclusively. In this case, you can obtain sound of
better quality, as the DVD Player does not process
video signals. (All the video output jacks send no
video signals.)
Video Circuit
O
f
f
Standby/On
Standby
Power
On
O
f
f
96
/
88.248
/
44.1 192
/
176.4
Sampling Rate
(
@@
)
kHz
PROGRESSIVE
SCAN
VIDEO CIRCUIT OFF
VIDEO CIRCUIT
OFF
VCD
CD
DVD-A
DVD-V
Remote
controller
DVD Player
Notes
• Some discs cannot be played without some on-screen menu interaction.
If this is the case, be sure to perform the on-screen procedures as
indicated before turning off the video signal processing circuitry.
• The VIDEO CIRCUIT OFF setting is canceled whenever the DVD
Player is turned off.
DPS-9.1(US_E)p36-43.p651 10/11/00, 19:0943