Filter
Top Products
34 Intel
®
Server System SR1500AL User’s Guide
4. Remove the system's cover. For instructions, see “Removing the System Cover”.
5. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct”.
6. Remove the heat sink, if installed.
7. Locate the processor socket and raise the socket handle completely (see Figure 24).
Figure 24. Lifting the Processor Socket Handle
8. Raise the CPU load plate (see Figure 25).
Figure 25. Installing the Processor
Note: Do not touch the socket pins; they are very sensitive and easily damaged.
9. Line up the alignment marks on the processor and the socket, and insert the
processor into the socket.
Note: Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
TP02074
TP02075
A
B