Filter
Top Products
Intel
®
Server System SR1500AL User’s Guide 35
10. Remove the protective socket cover (see Figure 26).
Note: Retain the protective socket cover for use when removing a processor that will not be
replaced.
Figure 26. Removing the Socket Cover
11. Lower the CPU load plate and lower the socket lever completely.
Installing the Heat Sink(s)
The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use
caution when you unpack the heat sink so you do not damage the TIM.
1. Set the heat sink over the processor, lining up the four captive screws with the four
posts surrounding the processor.
2. Loosely screw in the captive screws on the heat sink corners in a diagonal manner.
Do no fully tighten one screw before tightening another.
3. Gradually and equally tighten each captive screw until each is firmly tightened.
TP02076
A
B