Filter
Top Products
12. Zoom in the Video Image (compatible
with DVD, SVCD, VCD, JPEG, MPEG4/DIVX
discs)
a) The Zoom Function allows you to enlarge
or zoom out the video image and to pan
though the image. Press Zoom
repeatedly to activate the function and
choose the required zoom factor: Zoom 1,
Zoom 2, Zoom 3, Zoom 1/2, Zoom 1/3,
Zoom 1/4, Zoom Off.
Notes:
z This feature does not work when the Disc
Menu appears.
b) Use the Arrow buttons to pan across the
screen when the zoom factor is 1, 2 or 3.
13. Repeat a Specific Segment on the Disc
that You Define (compatible with DVD,
SVCD, VCD, CD, CD-G, DTS-CD, HD-CD,
WMA, MP3, MPEG4/DIVX discs)
a) During the normal of fast motion playback,
press the A-B button once, and “REPEAT
A-” will appears on the screen. This
indicates the start of the loop to be
repeated.
b) During the normal of fast motion playback,
press A-B again, and “REPEAT A-B” will
appears on the screen. It indicates the
end of the loop.
z Looping will run from set point A to set
point B until you turn off Repeat.
c) Press A-B again to cancel A-B loop
mode.
z When playing a MPEG4, DIVX, SVCD,
VCD, or CD disc, you can repeat a
specific segment only in one track. When
the next track begins, A-B Repeat turns
off automatically.
z When playing a DVD disc, you can
repeat a specific segment only in one title
/ chapter.
14. 3D Surround Mode (compatible with
SVCD, VCD, CD, CD-G, HD-CD, MP3,
MPEG4/DIVX discs)
Press the 3D button on the remote once, and
current 3D surround mode info will be
displayed on the screen. Press the Arrow
buttons to highlight the 3D surround setup
menu items; Press the 3D button again to turn
off the menu.
z Use the Up / Down arrow buttons and
press Enter to choose surround mode.
z “EQ: [STANDARD]” is highlighted, as the
graph showed below:
z Display the Band
z Adjust the key
Notes:
z When setting SRND, EQ is auto
setup to STANDARD.
z When setting EQ, SRND is auto
setup to OFF.
15. Volume control (compatible with DVD,
SVCD, VCD, CD, CD-G, DTS-CD, HD-CD,
WMA, MP3/JPEG, MPEG4/DIVX discs)
z You can press the Volume button on
the front of TV set or the amplifier to
control the sound level.
z Pressing the Vol+ button on the
remote allow you to amplify the sound
level; Pressing Vol- will reduce the
sound level.
Notes:
During DVD PCM output playback, this feature
does not work.
GB- 15