Filter
Top Products
10
The System Section
The System Section is comprised of the Cursor Buttons, the
Rotary Encoders, and the Assign Button.
The Shift button is included, because Shift Assign puts the unit
into Utility mode, and Shift Locate changes the function of the
Keypad from Locates to Program Changes.
The LCD is used to primarily to display the names of controls
and their parameters, locates and system settings.
The LED Display is used primarily for displaying time code.
Time code is displayed as SMPTE time (with or without frames)
or Feet and Frames. The right most decimal point lights when
drop frame code is received.
The display also shows Program Change, Bank, and Channel
number when in Program Change mode.
87
Fader MIDI Chan Controller #
Chan 1, Bank 1 14 00, etc.
Chan 8, Bank 1 “ 07
Chan 1, Bank 1 “ 08, etc.
Chan 8, Bank 2 “ 0F
Chan 1, Bank 3 “ 10, etc.
Chan 8, Bank 4 “ 3F
Touch MIDI Chan Controller #
Chan 1, Bank 1 13 00, etc.
Chan 8, Bank 1 “ 07
Chan 1, Bank 1 “ 08, etc.
Chan 8, Bank 2 “ 0F
Chan 1, Bank 3 “ 10, etc.
Chan 8, Bank 4 “ 3F