JMR electronic G5312 TV Mount User Manual


 
ID Settings & Option Jumpers
Refer to Chapter 4
and Chapter 9 for SCSI ID settings and option jumper settings.
Controller Canister Installation
1. Remove the four cover screws on the controller canister using a Phillips head
screwdriver and lift the cover off the canister.
2. Mount the controller into the canister with four screws that are provided
inside of the canister.
3. Connect the backup battery to the controller.
4. Connect the cover fan to the controller and close the canister cover. Replace
the 6 screws from Step 1 to secure the cover.
5. Install the controller canister into the Fortra unit.
FORTRA
H1 Chaparral G5312 Installation Guide Rev C
8-2