Filter
Top Products
The Inquiry Screen lists
some of the settings of the
unit that may be useful
during troubleshooting. The
Vendor ID, Product ID, and
Product Revision Level are
shown at the bottom of the
screen. When
troubleshooting, it is
important to check that the
Product Revision Level is at
the most recent. In the
example, the product
revision level shown is 1.00.
The Enclosure Config
Screen, shows what
components the enclosure
has been setup to recognize.
Components listed include
Fans, Power Supplies,
Canister Slots, Door Lock,
Temperature Sensors, and
Speaker. This screen does
not show the status of these
components, the Enclosure
Status Screens will show
status.
It is important to note that the enclosure has been programmed with the
information on this screen and that information can be changed using the
Firmware Option menu if a different setup is required. For example; If a power
supply is removed, the enclosure configuration will still report that the number of
power supplies is '2'.
FORTRA
H1 Chaparral G5312 Installation Guide Rev C
9-7