Filter
Top Products
41
Customizing your TV
Position Adjustment
Features (continued)
Position adjustment allows you to adjust the position of the picture on the screen vertically when
the aspect is set to panorama or cinema.
Notes:
• To reset the adjustment to the center, press the OK button.
• When the arrow disappears, while you are adjusting the position, the position is at its
maximum limit.
• If you select Regular, Slim, Full or Full Native size with aspect or Multi Screen, position
adjustment option is not selected.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set Panorama Zoom or Cinema Zoom for 1080p, 1080i and 720p signals, or
when PC mode is set.
• It is also possible to use Position Adjustment when you are in PC Mode.
> Position Adjustment
Select
Operate Back Exit
BACK MENU
Illumination
Allows you adjust the brightness of the illumination on the front of the TV.
High / Low / Off
Power Indicator
Allows you adjust the brightness of the POWER LED on the front of the TV.
High / Low / Off
The HDMI Size menu can only be selected when an HDMI 480p picture signal is being input
to the HDMI terminal. This option adjusts the position when an HDMI or DVI 480p picture
signal is being displayed on the screen. There are two types of HDMI 480p picture signals:
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted
by selecting Auto, Size1 or Size2.
Note:
• You can select Auto only when the signal is 480p for HDMI. When you select Auto, the
television will select "Size1" or "Size2" automatically.
HDMI Size
LCT2403-002A-A English.indd 41LCT2403-002A-A English.indd 41 6/3/08 9:49:21 AM6/3/08 9:49:21 AM