Filter
Top Products
19
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press VCR to select the VCR mode. (The VCR indicator will light)
Example: Setting the clock to 11:30, 23rd October 2002.
1
Press SET UP MENU. Press
or repeatedly until the dot
before SYSTEM SETUP blinks.
Then press OK. Then press
or repeatedly until the dot
before CLOCK SET blinks. Then
press OK.
2
Press / repeatedly or
number keys until “23” appears.
Then press .
3
Set the month, year, hour and
minute in the same way as the
step 2. Then press .
4
Press or to select “ON” or “OFF”, then press OK. If “ON” is
selected, any required time corrections will be performed
automatically (see left). In this case the personnel of the
appropriate TV station or of Telecom will be responsible for
correcting the time setting. If any
error occurs during such an
adjustment (e.g. switching from
summer time to winter time), your
clock will show the incorrect time.
To set the correct time select
“OFF” and follow the procedure
described above.
• In case of an erroneous input press
to go back to before
step and enter again.
5
Press SET UP MENU repeatedly until the TV picture appears
on the screen.
6
The clock will begin operation and the colon will blink on the
VCR display.
Setting the Time and Date
If the time and date is not be displayed
for some reasons after the ATS
function has been completed, a manual
clock adjustment will be required.
Note:
• In case of a power failure the clock will
continue to operate for another 30 min-
utes with quartz-controlled precision. To
indicate that the power failure has lasted
for an excessive period of time “0:00” will
blink on the display. In this case read-
just time and date.
If the clock does not have been adjusted
yet, the step 1 will appear automatically.
• The clock will only be automatically set
when the VCR is connected to the
Telecom CATV network. All the provided
CATV stations should be stored in the
VCR. This is the case when the ATS
function has been completed. The an-
tenna system must be free of any de-
fects, e.g. there should be no picture
noise. The clock will be re-adjusted every
30 minutes except the period between
23:00 and 1:00 o’clock. In case the total
difference between the indicated time
and the current time is more than 5 min-
utes, the clock will not be corrected. The
switching from winter time to summer
time will be considered.
The clock will not be adjust automati-
cally when:
• timer activated.
• antenna not connected.
• only an outdoor antenna or a satellite
receiver connected.
CLOCK SET
SYSTEM SETUP
LANGUAGE/SPRACHE/LANGUE
AV2 [DEC]
SELECT :
ENTER : OK
MENU
EXIT
:
CLOCK SET
DAY WED
23
MONTH
YEAR
TIME
1
2002
0:00
SELECT
:
SET
:
OK
: OK
EXIT : MENU
/ 0–9
AUTO TIME
ON
CLOCK SET
DAY WED
23
MONTH
YEAR
TIME
10
2002
11:30
SELECT
:
SET
:
OK
: OK
EXIT : MENU
/ 0–9
AUTO TIME
ON
CLOCK SET
DAY WED
23
MONTH
YEAR
TIME
10
2002
11:30
SELECT
:
SET
:
OK
: OK
EXIT : MENU
AUTO TIME
ON
VCR
2A73501AE(16-21) 4/17/02, 8:26 PM19