JVC 2A73501A DVD VCR Combo User Manual


 
34
In case of Timer progarms-overlapping
Do not overlap timer programs as portions of the con-
flicting programs will be lost. The first recording time
has priority over the next recording time as shown in
the diagram below.
Note:
The daily/weekly recording can be made continuously
until the recording is canceled or the tape reaches
the end.
During timer recording the automatic rewinding
mechanism does not function.
Confirmation/Cancellation of the Timer
Recording
1
If the Timer has been activated, now press to
deactivate the Timer. The clock symbol ( ) will
disappear. Then press VCR to change to VCR mode.
2
Press PROG. twice. All the
8 Timer memories will
appear.
3
To correct the
programmed setting:
Press or to select the
program you wish to correct,
then press OK to enter the
program input mode. Then
press or to select the
item you wish to correct.
Then correct the data with
or .
To cancel Timer program:
Press or to select the
written line. Then press
CANCEL. This line is now
canceled.
4
Press SET UP MENU (or PROG.) repeatedly until
the TV-picture appears.
Timer-Recording
5
Press OK to accept them.
To enter other programs,
repeat steps 2 through 4.
To return to the normal
screen, press SET UP
MENU twice.
6
Press . The clock symbol ( ) will appear on the
display and the DVD/VCR stands by for recording.
At the same time, VCR mode will change to DVD
mode automatically. You can use DVD even if the
VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
• If the clock symbol (
) blinks in the display in
spite of the pressing of , the cassette may not
have been loaded yet. (see page 22)
If the cassette is ejected in spite of the pressing
of , the erase prevention tab of the cassette may
have been removed. (see page 22)
Note:
• In case of the timer recording from the scart socket,
proceed as follows: In step 4 press or repeat-
edly until the "CH" line blinks. Then press AUX re-
peatedly until "AV1" or "AV2" or "AV3" appears.
If the clock symbol ( ) blinks when the timer record-
ing ended, the TV program has not been completely
recorded because of an insufficient tape supply. Press
to cancel the timer program or press EJECT to
remove the cassette tape.
During timer recording standby mode, the VCR mode
cannot be selected. To use the VCR, press at first,
then press VCR to change to VCR mode. After you
use the VCR, press again to put the VCR into timer
recording standby mode.
Timer Recording Special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording
Follow the procedure for timer recording on both pages
before. At picture 3 press or repeatedly until the
desired setting appears. Then press . When you press
or repeatedly, the indicator at DATE will change
as follows, in case today is Friday.
MON-SAT = everyday from
Monday fo Saturday.
WKL-SAT = each Saturday
--:--
--:-------- --
13:00 14:30
1V
23 MON
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
-
-
-
-
-
-
-
LP
SELECT :
EXIT : MENU
/ OK
One month later
minus one day
SUN-SAT 25 FRI ..... 24 SUN WKL-FRI
MON-SAT MON-FRI WKL-THU.....WKL-SAT
8 : 00
11 : 00
9 : 00
10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
TIMER REC SET
DATE
WKL-WED
11:30
--:--
2 ZDF
START
END
CH
SELECT :
SET :
EXIT
: MENU
SP
SPEED
ON
VPS/PDC
/ 09
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
25 WED
12:15 13:00 4
23 MON
13:00 14:30 1V
-
-
-
-
-
LP
SP
SELECT :
EXIT : MENU
/ OK
--:--
--:-------- --
-
--:--
--:-------- --
17:30 18:00 7V
15
TUE
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
25 WED
12:15 13:00 4
23 MON
13:00 14:30 1V
-
-
-
-
-
SP
LP
SP
SELECT :
CLEAR
: CANCEL EXIT : MENU
/ OK
23 MO
13:00
1 ARD
LP
OK : OK
14:30
TIMER REC SET
DATE
START
END
CH
SELECT :
SET : / 09
EXIT : MENU
SPEED
ON
VPS/PDC
2A73501AE(34-36) 4/17/02, 8:28 PM34