Filter
Top Products
32
Using the TV’s menu
$9763(/&7$8(QJOLVK
5 Press the green or red button
repeatedly until the TV channel you
want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-
tune the TV channel.
If you cannot hear the normal
sound even when the picture of the
TV channel appears normally:
The SYSTEM setting is wrong. Press the
3 button and choose a SYSTEM that has
normal sound.
6 Press the a
aa
a button and register
the TV channel to a Programme
number (PR)
The normal EDIT menu is resumed.
DEMO
The DEMO function automatically
demonstrates some of the TV functions.
Choose ON or OFF. Then press the
a
aa
a button
The DEMO function is set to ON, and the
demonstration will start.
To stop the demonstration:
Press one of the buttons on the remote
control.
When the DEMO function is set to ON:
Each time the TV is turned on, the
demonstration starts automatically. If you do
not want that to happen, perform the
following operations to cancel the DEMO
function:
1 Display the DEMO menu again
2 Press the 6
66
6 buttons to choose
OFF
3 Press the a
aa
a button to cancel the
DEMO function
AV-32&28T35SPE_Eng.fm Page 32 Thursday, February 6, 2003 2:29 PM