Filter
Top Products
24
Install
Edit/Manual
You can change PR channel settings.
• You can delete an unwanted station from a PR channel,
• You can change the PR channel number of a station,
• You can add station IDs to PR channels,
• You can insert a new station to a PR channel, or
• You can manually set the desired station to a PR channel.
Press to choose EDIT/MANUAL, then
press .
The Edit menu appears.
Use any of the following procedures to edit the
PR channel setting.
Press .
This completes the procedure and the T-V LINK menu
appears.
When a T-V LINK compatible VCR is connected:
You can transmit the latest PR channel data from the
TV to the VCR. Carry out the procedure described in
“Downloading the PR channel data to the VCR” on page
26.
When a T-V LINK compatible VCR is not connected:
You cannot transmit the latest PR channel data from the
TV to the VCR. Press to exit the T-V LINK menu.
■ Deleting a station
Press to choose the station you want to
delete then press the yellow button.
■ Changing the PR channel number
Press to choose the station, then press .
Press to move the station to the desired
PR channel number.
• To cancel the operation, press (Information).
Press .
■ Adding a Station ID
Press to choose the station, then press
the red button.
Press to choose the first character of the
desired Station ID.
Note:
• If you delete a station from a PR channel, the fol-
lowing stations’ PR channel numbers move back
by one.
1
/
OK
2
3
OK
TV
1
/
1
/
2
/
3
1
/
2
/
eng_AV32-28WFX1EU_P20-34.fm Page 24 Wednesday, February 23, 2000 9:15 AM