Filter
Top Products
4
Preparation
If "ACI START/ACI SKIP" appears in the Auto Program menu:
You can use the ACI (Automatic Channel Installation) function to decode
the ACI data and complete the registration of all the TV channels in a
short period of time. For details of the ACI function and how to use it, re-
fer to “Using the ACI function” on page 26.
If you don't want to use the ACI function, press to choose ACI SKIP
and then press .
Press to exit the Edit menu.
The T-V LINK menu is displayed.
/
OK
7
OK
OK
MENU
■ When a T-V LINK compatible VCR is
connected
Turn the VCR on.
Press .
■ When a T-V LINK compatible VCR is
not connected
Press .
The menu disappears.
This completes the Initial Settings
procedure.
8
9
OK
OK
MENU
8
TV
TV
The transmission of PR channel data from the TV to the VCR begins. The display disappears once the data trans-
mission ends.
This completes the Initial Setting procedure.
Notes:
• For details about T-V LINK, refer to page 5.
• Depending on the type of VCR, the display may change once data transmission ends. In this case, refer to the VCR’s In-
struction manual.
Notes:
• If this TV identifies a broadcast
station name, that station ID is
also automatically registered in
a PR channel.
• To cancel the Auto program-
ming, press .
• To edit PR channels or allocate a
station to the PR0 (AV) channel,
refer to page 24 “Edit/Manual”.
• If a station you want to view is
not set to a PR channel, manual-
ly set it using the Edit menu.
(See page 24.)
TV
eng_AV32-28WFX1EU_P1-11.fm Page 4 Wednesday, February 23, 2000 9:13 AM