Filter
Top Products
ENGLISH
25
Install
Press the blue button.
The ID List menu appears.
Press to choose the station ID.
• To cancel the operation, press (Information).
Press .
Adding a Station ID name of your own:
Do the following procedure in place of “Adding a Station ID”.
Press to choose the station, then press
the red button.
Press to choose a character, then press
to move the cursor.
Repeat step 2 to complete the Station ID, then
press .
■
Inserting a new station
If you want to insert French stations to the PR channels:
You have to set the Country setting to FRANCE before insert-
ing French stations to the PR channels.
If your Country setting is not FRANCE, change the Country
setting to FRANCE. To change the Country Setting, refer to
“Changing the Country Setting” on page 26.
Press to choose the PR channel, then
press the green button.
Press to choose CC or CH
To set a French station:
Choose CH1, CH2, CC1 or CC2.
• To cancel the operation, press (Information).
Press the number buttons to enter the channel
number.
The channel number blinks. When the channel setting
is complete, the blinking goes off.
• To enter a one-digit channel number, enter the
number and press
.
■
Setting a station to a PR channel
manually
If you want to set French stations to the PR channels:
You have to set the Country setting to FRANCE before setting
French stations to the PR channels.
If your Country setting is not FRANCE, change the Country
setting to FRANCE. To change the Country Setting, refer to
“Changing the Country Setting” on page 26.
Press to choose a PR channel number,
then press the blue button.
Press the green or red button to search for a
station.
Scanning stops when the TV finds a station.
To continue searching, press the red or green button
again and repeat until the station you want appears.
If reception is poor:
Press the blue or yellow button to fine-tune the station.
If reception is not correct:
Press to choose the correct broadcast system.
When your COUNTRY setting is FRANCE:
If the broadcast system is not set correctly, you may be
unable to find the station you want to view. At such a
time, press to select the correct broadcast system,
then return to Step 2 and repeat it.
Press .
Note:
• For details on the relationship between the dis-
played CH/CC number and the actual channel
number, see the Channel Table on page 30.
3
4
/
5
OK
1
/
2
/
/
3
OK
1
/
2
/
Note:
• When you insert a station, the station preset to
PR99 is deleted.
Note:
• PR channel number “AV” appears on the screen
as PR 0 channel. We recommend setting this PR
channel to the VCR RF channel from a VCR con-
nected to the aerial socket.
3
OK
1
/
2
3
OK
eng_AV32-28WFX1EU_P20-34.fm Page 25 Wednesday, February 23, 2000 9:15 AM