Filter
Top Products
10
Cable/RF connector
Step Two - Making Basic Connections
Next you will need to connect your television to an antenna, VCR or cable system. The most
basic VCR and antenna/cable connection is shown below. For more detailed connections, such
as ones where a cable box is required, or connecting with a combination of a cable box and
VCR, home stereo system, etc., see pages 12 to 20.
1) Connect an RF Cable from the wall outlet into the RF Cable In on the back of the TV.
Quick Setup 2
1) Connect the Red Cable from VCR Audio Output into the Red TV Audio In.
2) Connect the White Cable from VCR Audio Output into the White TV Audio In.
3) Connect the Yellow Cable from VCR Output into the Yellow TV Video In, OR Connect an RF
Cable from VCR RF Cable Out into the RF Cable In on the back of the TV.
NOTE:
• White, Yellow and Red are the most common colors for VCR Cables. Some models may vary
in color. Please consult the user’s manual for your VCR Player for more information.
• See page 23 for instructions on programming your remote control to operate the basic func-
tions of your VCR Player.
Connecting to a VCR
Proceed to Step Three
VCR
IN
IN
WALL
CABLE or ANTENNA OUT
OVER
OVER
AUDIO
R L
VIDEO
S-VIDEO
BACK of TV
R
L
V
RED
WHITE
YELLOW
AV-48WP30 English 3/12/02 2:54 PM Page 10