V-Chip
38
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes
pre-set with a Lock Code of “0000”. You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Access the onscreen menus by pressing M
ENU on your remote control. You may then either
use the up and down arrows to scroll to the INITIAL SETUP menu, or press MENU until the
INITIAL SETUP screen appears. Use the arrows to move to the Set Lock Code. Press the
¥or arrows to select.
The Padlock icon will appear. Press Zero on the remote’s 10-key pad to access the LOCK
CODE.
Use the ¥ or arrow to change the first digit.
When you have selected the first number, move
to the second digit by pressing the arrow. You
can change this digit using the ¥ arrows.
Repeat this process until all four digits are set.
When you have entered your LOCK CODE, press
to move to FINISH.
Press ¥or to exit.
Notes: In order for V-Chip settings to take effect, V-Chip settings must be turned ON in
the V-CHIP menu (page 35). You can automatically unblock all of your restrictions by turning
V-Chip settings OFF in the V-CHIP menu (page 35). You can always unblock a restriction by
re-entering the V-CHIP menu and removing the lock icon.
