Filter
Top Products
30
10 SUPER SCENE FINDER FUNCTION
Preparation
Connect the 9-pin D-sub connector of the installed SA-K46
RS-232C interface board to a personal computer, etc. with
an RS-232C cable.
Use a reverse type cable. For RS-232C interface settings,
refer to “RS-232C specifications
” on page 32.
Set the No. 050 <REMOTE SELECT> menu switch to
“RS232C”, “IEEE 1394+ RS232C
”, “JVC BUS + RS232C
”
or “JVC BUS + RS232C + 1394
”.
The SSF data recorded on the tape with the GY-DV500U’s Super Scene Finder function can be read out by installing the
optional SA-K46 RS-232C interface board. Consult your JVC dealer for details on installation of the SA-K46 RS-232C interface
board.
Super Scene Finder (SSF) data
SSF data includes the following items.
SSF data
1. Model ID data
Unique identification code of the recording VCR
2. Reel No.
Cassette tape number
3. Mark in point data
Time code data at the start point specified by
pressing the [TAKE] button during shooting in the
Mark mode on the GY-DV500
4. Mark out point data
Time code data at the end point specified by
pressing the [TAKE] button during shooting in the
Mark mode on the GY-DV500
5. Cue point data
Time code data at the cue points the GY-DV500
starts and ends recording and the cue point
specified by pressing the [TAKE] button during
shooting in the Cue mode.
Usage example
You can use SSF data to build a database that will enable
you to manage your library of original recordings more
efficiently.
By creating a table linking the model ID and reel No. to
the recording’s title, you can easily search and retrieve a
tape.
Recordings
Model ID Reel No. Recording title
0001 0222 '99 athletic meeting
0002 0100 '99 spring excursion
0003 0150 '99 Christmas party
:::
For example, when you retrieve
“'99 spring excursion
”, the
model ID (0002) and the reel No. (0100) are also provided.
Please note that this function is not provided. The table
must be developed by the user.
Based on the “mark in point data
”, “mark out point data
”
and “cue point data” specified with the GY
-DV500’s
Super Scene Finder function, you can create batch
capture data for a non-linear editing system (Canopus
’
DVRex-RT or Casablanca). This allows you to
automatically acquire only specified scenes.
Batch capture data conversion software for Canopus
’
s
DVRex-RT is distributed at no charge on the Internet (as
of February, 2000).
pSearch
Reading out SSF data
Insert the tape on which SSF data is recorded.
Transmit the RS-232C command D5h: SSF DATA
SENSE from a personal computer or a non linear
editing system.
[The SSF data is returned from the VCR.
(Display example)
START
ID
REEL NO.
SCENE MARK IN MARK OUT CUE
001 M 00:00:00:16 00:00:04:19
002 M 00:00:06:03 00:00:08:08
003 C 00:03:15:17 00:03:57:00
004 C 00:03:56:18 00:05:37:24 00:04:00:21
004 C 00:03:56:18 00:05:37:24 00:04:07:22
004 C 00:03:56:18 00:05:37:24 00:04:18:23
END
Note:
5When a tape is recorded from the beginning in this
unit, recorded SSF data is erased.
31
11 RS-232C INTERFACE
11-1 Command tables
This section provides information on programming VCR operations via the RS-232C interface.
JVC table-1
Basic table
0 123 4 5 6789 A B C D E F
0 DATA “0” ENTER STANDBY TC DATA
ON PRESET
1 COMPLE- DATA “1” CLEAR STANDBY TC UB DATA
TION ERROR OFF PRESET
2 ERROR DATA “2” CUE UP PREROLL CUE UP COUNTER
WITH DATA WITH DATA RESET
3 CASSETTE DATA “3” EJECT
OUT
4 DATA “4” FULL EE
ON
5 NOT DATA “5” F-SHUTTLE FULL EE SSF DATA
TARGET OFF SENSE
6 DATA “6” CLEAR R-SHUTTLE PREROLL PREROLL JVC
TIME SENSE TIME PRESET TABLE 1 ON
7 DATA “7” STATUS STATUS TIMER MODE JVC BASIC
SENSE SENSE SELECT TABLE ON
8 DATA “8” CURRENT
TC SENSE
9 DATA “9” CURRENT
CTL SENSE
A ACK PLAY REV REC REC/ DUB
X1 REQUEST
B NAK FWD REV FF REC VTR IND
X2 X2 PAUSE
C FWD REV
REW
A.DUB CURRENT TC
X0.2 X0.2 UB SENSE
D F-STILL R-STILL F-FIELD A.DUB JVC STATUS MEMORY SW
STEP PAUSE SENSE PRESET
E FWD REV DATE R-FIELD DATE
X10 X10 PRESET STEP SENSE
F STOP STILL TIME TIME
PRESET SENSE
0123 45 6 7 89A B C D E F
0 DATA “0” ENTER STANDBY
ON
1 COMPLE- DATA “1” CLEAR ROM STANDBY DEVICE TYPE
TION ERROR VERSION OFF
2 ERROR DATA “2” PREROLL CUE UP AND COUNTER
PLAY WITH DATA RESET
3 CASSETTE DATA “3” EJECT MEMORY SW
OUT SENSE
4 DATA “4” FULL EE TAPE REMAIN
ON SENSE
5 NOT DATA “5” F-SHUTTLE FULL EE
TARGET OFF
6 DATA “6” CLEAR R-SHUTTLE JVC
TABLE 1 ON
7 DATA “7” STATUS STATUS TIMER MODE JVC BASIC
SENSE SENSE SELECT TABLE ON
8 DATA “8” CURRENT
TC SENSE
9 DATA “9” CURRENT
CTL SENSE
A ACK PLAY REC REC/ DUB
REQUEST
B NAK
OPERATE
FF REC VTR IND
ON PAUSE
C
OPERATE
REW
A.DUB
OFF
D F-FIELD A.DUB JVC STATUS MEMORY SW
STEP PAUSE SENSE PRESET
E DATE R-FIELD DATE
PRESET STEP SENSE
F STOP STILL TIME TIME
PRESET SENSE