JVC DD868EU VCR User Manual


 
EN 35
Satellite Tuner Multi-Brand
Remote Control
Your remote control can operate the basic functions of your
satellite tuner set. In addition to JVC satellite tuners, other
manufacturer’s satellite tuners can also be controlled.
Before you start . . .
Turn off the satellite tuner using its remote control.
SET SATELLITE TUNER
BRAND CODE
1
Refer to the chart below. Press and hold CABLE/SAT on
the recorder's remote control for over 2 seconds, enter
your satellite tuner’s brand code using the NUMBER
keys, then press OK.
Check if the satellite tuner's power goes on as it should.
If it does, try other operations ( step 2).
Once you have set the remote control to operate the
satellite tuner, you don't have to repeat this step until
you replace your remote control's battteries.
Some satellite tuner brands have more than one code.
If the satellite tuner does not function with one code,
try entering another.
OPERATE SATELLITE TUNER
2
First, press CABLE/SAT to set the remote control to
satellite tuner mode, then press the corresponding
button: , TV PROG +/–, NUMBER keys.
For VIDEOWAY or some brands of satellite tuner, you
must press after having pressed the NUMBER
keys.
The NUMBER buttons may not function with some
satellite tuners.
IMPORTANT
Although the provided remote control unit is compatible with
JVC satellite tuners, as well as many other models, it may not
work with your satellite tuner, or in some instances, may have
limited function capability.
1 2 3
4 5 6
7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
CABLE/SAT
NUMBER
TV PROG+/–
OK
SATELLITE TUNER BRAND CODE
JVC 72, 73
AMSTRAD 60, 61, 62, 63
BT 72
CANAL + 81
FINLUX 68
GRUNDIG 64, 65
HIRSCHMANN 64
ITT 68
JERROLD 75
KATHREIN 70, 71
LUXOR 68
MASPRO 70
NOKIA 68
PACE 65, 67
PANASONIC 74
PHILIPS 66
RFT 69
SALORA 68
SIEMENS 64
SKYMASTER 69
VIDEOWAY 76
WISI 64