JVC DD868EU VCR User Manual


 
40 EN
TV PROG
JOG
PAUSE
TIME SCAN SHUTTLE
Insert editing replaces part of the recorded scene with new
material. Both the picture and Hi-Fi audio soundtrack are
replaced with new ones, while the normal audio soundtrack
remains unchanged. If you wish to change the normal audio
track as well, use the audio dubbing function simultaneously.
Use your video recorder as the recorder.
Insert Editing
MAKE CONNECTIONS
1
Connect the player's VIDEO OUT and AUDIO OUT
connectors to your recorder's VIDEO and AUDIO input
connectors on the front panel.
SET INPUT MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
appears in place of a channel number.
LOCATE END POINT
3
Load the recording cassette into your recorder, and play
it back to determine the edit-out point (the end of the
segment to be replaced) using the TIME SCAN SHUTTLE
ring or the JOG dial or pressing
@ #
and PAUSE.
RESET THE COUNTER
4
Press 0000 to change the counter display to "0:00:00".
LOCATE START POINT
5
Determine the edit-in point (the beginning of the
segment to be replaced) using the TIME SCAN SHUTTLE
ring or the JOG dial or pressing
@ #
and PAUSE.
Be sure to engage the Still mode at the edit-in point.
Before insert editing
After insert editing
Source tape
Recorded tape
Recorder Your recorder
Player
Audio/Video signal
Another recorder
Video/Hi-Fi
audio track
Normal
Audio track
1 2 3
4 5 6
7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
PAUSE
TV PROG
NUMBER "0"
0000
EDITING (cont.)