JVC DD868EU VCR User Manual


 
HR-DD868EU
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
EU
Auto Set Up – referring to the display panel
The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.
BEFORE YOU START PLEASE MAKE SURE THAT:
The TV aerial cable is connected to the ANT.IN jack on the rear panel of the video recorder.
The video recorder's mains power cord is connected to a mains outlet.
The video recorder is turned off.
Load batteries into the remote control.
1
Press (recorder/remote).
2
Press %fi (remote) to select the international telephone
country code.
If you have selected a country code other than 32 (BELGIUM) or 41 (SUISSE), go to step 3.
If you have selected 36 (MAGYARORSZAG), 42 (CESKA REPUBLIKA), 48 (POLSKA) or EE (OTHER EASTERN
EUROPE), press OK. Clock Set screen will appear.
Set the clock manually ( pg. 56 – 57), then go to step 3.
If you have selected 32 (BELGIUM) or 41 (SUISSE), press OK (remote) and select the language code by
pressing %fi (remote), then
go to step 3.
(Ex.) DEUTSCHLAND is selected.
Language Code
ENGLISH : 01 NEDERLANDS : 06
DEUTSCH : 02 SVENSKA : 07
FRANCAIS : 03 NORSK : 08
ITALIANO : 04 SUOMI : 09
CASTELLANO : 05 DANSK : 10
Language Code
(Ex.) FRANCAIS is selected for BELGIUM
International Telephone
Country Code
FOR MORE INFORMATION
SEE INSTRUCTIONS/P4
EN
International Telephone Country Code
BELGIUM : 32 NORGE : 47
ESKÁ REPUBLIKA : 42 ÖSTERREICH : 43
DANMARK : 45 POLSKA : 48
DEUTSCHLAND : 49 PORTUGAL : 351
ESPAÑA : 34 SUISSE : 41
GREECE : 30 SUOMI : 358
ITALIA : 39 SVERIGE : 46
MAGYARORSZÁG : 36
OTHER WESTERN EUROPE
:- -
NEDERLAND : 31
OTHER EASTERN EUROPE
:EE
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Malaysia
0599IYV
*
ID
*
PJ1
3
Press OK (remote). "Auto" appears on the display panel.
4
Press OK (remote) to start Auto Set Up. Do NOT press any button on the video recorder or remote control during
"Auto" is blinking.
If "– –:– –" appears on the display panel, see page 7 of the instructions.
*
Once you have performed Auto Set Up, even if the recorder's memory backup has expired, the recorder will
not perform Auto Set Up again. Perform tuner setting (
pg. 48) and/or clock setting (
pg. 56) as required.