JVC LD-HD2KBU DVD Player User Manual


 
17
Control from external device
It is possible to control this unit by connecting a computer to the [RS-232 CONTROL] terminal at the rear of this unit.
Please request a connection cable from us if needed.
For details, please consult your authorized dealer.
Before plugging in the power cord, ensure that all devices have been connected.
RED/Pr GREEN/Y BLUE/Pb H SYNC V SYNCMONITOR
A
SS-THRU
DVI OUTPUT RS-232OPTION RS-232CONTROL
RS-232C Connection Cable (Sold Separately)
(Straight Cable)
Rear side of this unit
Connecting the Power Cord (Supplied)
a Connect the supplied power cord to the [AC INPUT]
terminal of this unit
b Connect the earth wire to the earth terminal
available in the building, followed by inserting the
main plug of the supplied power cord into the
outlet
Power Cord
(Supplied)
b
a
Cautions Against Fire and Electric Shock
When not using devices, remove the power plug from the wall outlet.
Do not use power cords for connection other than those supplied.
Do not use a power voltage different from that which is indicated.
Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat or stretch the power cords as this
may cause damage to the cords.
Do not insert or pull out plugs with a wet hand.
ENGLISH
LD-HD2KU_E.book Page 17 Thursday, November 17, 2005 4:27 PM