Filter
Top Products
28
Adjustments and Settings Using Menus (continued)
C Display Menu
The Display menu will not function if ASET: 1080i TO
1080pB is set to AHIGH BANDWIDTH MODEB.
Position
................................................................................................
.
Horizontal
Does not function on this processor.
................................................................................................
.
Vertical
Does not function on this processor.
................................................................................................
.
Border Lvl
Adjusts the blanking level (border level) from black to
white. When using a 4:3 source on a 16:9 screen, black
bars will appear on the left and right of the image. Adjust
these bars to gray color.
................................................................................................
.
Left
Adjusts the blanking level at the left edge.
The setting value will be displayed on the LCD.
................................................................................................
.
Right
Adjusts the blanking level at the right edge.
The setting value will be displayed on the LCD.
................................................................................................
.
Bottom
Adjusts the blanking level at the bottom edge. The setting
value will be displayed on the LCD.
................................................................................................
.
Top
Adjusts the blanking level at the top edge. The setting
value will be displayed on the LCD.
D Patterns Menu
The test pattern in this unit. Used for image adjustment,
etc. It is not possible to adjust the test pattern itself.
................................................................................................
.
Test Pattern
Sets whether to use the test pattern in this unit or not.
................................................................................................
.
Select
Selects the test pattern to output.
Setting Values: 0-100
Default Value: 0
Setting Values: 0-100
Default Value: 0
Setting Values: 0-100
Default Value: 100
Position
39
0
Border Lvl
Left Right
0
Top
Bottom
Horizontal
Vertical
Input
Picture
Patterns
Display
Setting Values: 0-100
Default Value: 0
Setting Values: 0-100
Default Value: 100
Setting Values: Off, On
Default Value: Off
Setting Values:
Color Bars, Pluge, Window, Multiburst, Border,
Converge, Blue, Red, Green, Black, Cr Ramp, Cb
Ramp, Y Ramp, Grey Step, Rev Bars
Default Value: Color Bars
Test Pattern
Select
Off
Color Bars
Input
Picture
Patterns
Display
LD-HD2KU_E.book Page 28 Thursday, November 17, 2005 4:27 PM