Filter
Top Products
2
SAFETY PRECAUTIONS
IMPORTANT INFORMATION
WARNING: TO PREVENT FIRE OR SHOCK HAZ-
ARDS, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION:
To reduce the risk of electric shock, do not remove cover.
Refer servicing to qualified service personnel.
This product is equipped with a 3-blade grounding type plug
to satisfy UL, CUL, TUV, FCC rules.
If you are unable to insert the plug into the outlet, contact
your electrician.
FCC INFORMATION (U.S.A. ONLY)
CAUTION:
Changes or modifications not approved by JVC could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital devices, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful inter-
ference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encourage to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
About the installation place
Do not install the processor in a place that cannot support its
weight securely, or that does not allow for proper heat venti-
lation.
IMPORTANT SAFEGUARDS
IMPROPER USE OF THIS EQUIPMENT CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARD.
In order not to defeat the safeguards incorporated into this
product, observe the following basic rules for its installation,
use and service.
- All the safety and operating instructions should be read
before the product is operated.
- The safety and operating instructions should be followed
and retained for future reference.
- All warnings on the product and in the operating instruc-
tions should be adhered to.
- Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
- Do not use attachments not recommended by the product
manufacturer as they may be hazardous.
- Do not use this product near water. Do not use immedi-
ately after moving from a low temperature to high temper-
ature, as this causes condensation, which may result in
fire, electric shock, or other hazards.
- Do not place this product on an unstable cart, stand, or
table. The product may fall, causing serious injury to a
child or adult, and serious damage to the product. The
product should be mounted according to the manufac-
turer’s instructions, and should use a mount recom-
mended by the manufacturer.
- When the product is used on a cart, care should be taken
to avoid quick stops, excessive force, and uneven sur-
faces which may cause the product and cart to overturn,
damaging equipment or causing possible injury to the
operator.
- Slots and openings in the cabinet are provided for ventila-
tion. These ensure reliable operation of the product and
protect it from overheating. These openings must not be
blocked or covered. (The openings should never be
blocked by placing the product on bed, sofa, rug, or simi-
lar surface. It should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been
adhered to.)
- This product should be operated only with the type of
power source indicated on the label. If you are not sure of
the type of power supply to your home, consult your prod-
uct dealer or local power company.
- This product is equipped with a three-wire plug. This plug
will fit only into a grounded power outlet. If you are unable
to insert the plug into the outlet, contact your electrician to
install the proper outlet. Do not defeat the safety purpose
of the grounded plug.
- Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at doors,
plugs, receptacles, and the point where they exit from the
product.
- For added protection of this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and discon-
nect the cable system. This will prevent damage to the
product due to lightning and power line surges.
LD-HD2KU_E.book Page 2 Thursday, November 17, 2005 4:27 PM