JVC ENLPT0736-001B DVR User Manual


 
Filename [HM-HDS4EX_05Timer.fm]
Masterpage:Left
46
EN
Page 46 April 7, 2003 2:48 pm
TIMER RECORDING
S
HOW
V
IEW
®
Timer
Programming
You can programme this recorder to timer-record as many as 16
programmes.
With the S
HOW
V
IEW
system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
A
Turn on the recorder.
Press
1
.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
C
Access the S
HOW
V
IEW
screen.
A
Press
PROG
.
B
Press
w
e
to move the arrow to “SHOWVIEW”, then
press
OK
.
When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel
some of the currently set programmes. (
pg. 50)
D
Enter the S
HOW
V
IEW
number.
Press the
number keys
to enter the S
HOW
V
IEW
number of
a programme you wish to record.
OR
A
Press
w
r
e
t
to move the arrow to the desired
number key, then press
OK
.
B
Repeat step
A
to enter all needed numbers.
If you make a mistake and needed to delete the last entered
number, press
w
r
e
t
to move the arrow to “DELETE”, then
press
OK
.
To delete all entered numbers at the same time, press
w
r
e
t
to move the arrow to “DELETE ALL”, then press
OK
.
E
Select the recording deck, then confirm the
S
HOW
V
IEW
number.
A
Press
w
r
e
t
to move the arrow to “RECORD TO”,
then press
OK
.
B
Press
r
t
to select “HDD” or “VHS”, then press
OK
.
C
Press
t
to select “CONFIRM”, then press
OK
.
If the number you entered is invalid, “SHOWVIEW NO.
ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears
on the TV screen. Input a valid S
HOW
V
IEW
number.
If “SET GUIDE PROG THEN RETRY” appears on the TV
screen, set Guide Program Numbers (
pg. 85) manually.
F
Check the programme data.
G
Set the recording speed.
A
Press
r
t
to move the arrow to “REC MODE”, then
press
OK
.
B
Press
r
t
to select the desire mode, then press
OK
.
Before performing the S
HOW
V
IEW
Timer
Programming:
Make sure that the recorder’s built-in clock is set properly.
Turn on the TV and select the AV mode.
Slide
TV/CABLE/SAT
switch to the right.
?
The S
HOW
V
IEW
number you
entered and the matching
timer-recording information
are displayed on the TV
screen. Check they are
correct.
To cancel this setting, press
PROG
.
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW
V
IEW
®
System Setup” on page 85
and set the Guide Program number correctly.
HM-HDS4EX_05Timer.fm Page 46 Monday, April 7, 2003 2:48 PM