Filter
Top Products
Masterpage:Right-NoTitle0
EN
65
Filename [HM-HDS4EX_05Timer.fm]
Page 65 April 2, 2003 3:53 pm
Normal Dubbing
(from HDD to VHS)
You can dub selected scenes from the HDD deck to a cassette,
starting and stopping wherever you wish.
A
Load a cassette.
Insert a cassette with the record safety tab intact.
B
Prepare the HDD deck for dubbing.
A
Slide
TV/CABLE/SAT
to the right, then press
HDD
and
select the programme to be dubbed. You can select the
programme by HDD Navigation. (
੬
pg. 24)
B
Press
VCR
PR+/–
to set the channel other than
“DUB”.
C
Locate the start point.
A
Search for the point where you want to start dubbing
by pressing
4
,
5
or
3
then press
8
.
B
Press
3
a little, then press
4
to start playback.
C
Press
9
to pause playback a little before the start
point.
D
Prepare the VHS deck for dubbing.
A
Press
S-VHS
.
B
Press
VCR PR+/–
to set the channel “DUB”.
C
Press
MODE
to select tape speed.
D
Search for the point where you want to start dubbing
by pressing
4
,
5
or
3
then press
8
.
E
Start dubbing.
A
Press
HDD
and
4
to start playback.
B
Press
S-VHS
and
7
(
7
and
4
on the remote control)
to start dubbing.
F
End dubbing.
Press
8
. Then press
HDD
and press
8
.
NOTES:
● There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing
is not recorded.
?
HM-HDS4EX.book Page 65 Wednesday, April 2, 2003 3:55 PM