JVC ENLPT0736-001B DVR User Manual


 
Filename [HM-HDS4EX_05Timer.fm]
Masterpage:Left
48
EN
Page 48 April 2, 2003 3:53 pm
TIMER RECORDING (cont.)
Express Timer
Programming
You can programme this recorder to timer-record as many as 16
programmes.
If you do not know the S
HOW
V
IEW
number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
A
Turn on the recorder.
Press
1
.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
C
Access the programme screen.
A
Press
PROG
.
B
Press
w
e
to move the arrow to PROGRAMME, then
press
OK
.
When PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME appears on the TV screen, you need to cancel
some of the currently set programmes. (
pg. 50)
D
Select the programme date.
Press
w
r
e
t
to move the arrow to the desired date,
then press
OK
.
E
Select the recording deck.
A
Press
r
t
to move the arrow to RECORD TO, then
press
OK
.
B
Press
r
t
to select HDD or VHS, then press
OK
.
F
Set the start time and stop time of the
programme.
A
Press
t
to move the arrow to START or STOP,
then press
OK
.
B
Press
r
t
to select the desired time, then press
OK
.
G
Select the channel position.
A
Press
t
to move the arrow to TV PROG, then press
OK
.
B
Press
r
t
to select the desired channel, then press
OK
.
If you want to set a satellite programme, press the
number key
0
to change TV PROG to SAT, then press
VCR PR
+/–
.
C
Press
t
to move the cursor to CONFIRM, then press
OK
.
H
Set the recording speed.
A
Press
r
t
to move the arrow to REC MODE, then
press
OK
.
D
Press
r
t
to select the desire mode, then press
OK
.
Before performing Express Timer Programming:
Make sure that the recorders built-in clock is set properly.
Turn on the TV and select the AV mode.
Slide
TV/CABLE/SAT
switch to the right.
?
HM-HDS4EX.book Page 48 Wednesday, April 2, 2003 3:55 PM